Step 3: Install The Telephone Line Filters - PSC DSL Self Install Manual

PSC DSL Self-Install Guide

Step 3: Install The Telephone Line Filters

Install the Data/Phone Filter
1. Locate the jack where you will install the DSL modem.
2. Connect the data/phone filter to the wall jack.
3. Connect the phone (if needed) to the "Phone" side of the filter.
Install the In-line Filters
1. At each of your other phone jacks, disconnect the device connected to
the jack (phone, Caller ID, answering machine, fax machine or satellite
receiver).
2. Connect the in-line filter to the wall jack.
3. Reconnect the device to the in-line filter.
- 5 -