Connecting An Ac/Dc Power Supply - LXE VX3X User Manual

Vehicle mounted computer

Hide thumbs Also See for VX3X:

Table of Contents

Connecting an AC/DC Power Supply

Note: The LXE-approved AC Power Supply and Adapter Cable are only intended for use in a 25ºC (77ºF) maximum

ambient temperature environment.

In North America, this unit is intended for use with a UL Listed ITE power supply with output rated 12 – 80 VDC, minimum

15W75W . Outside North America, this unit is intended for use with an IEC certified ITE power supply with output rated 12 – 80

VDC, minimum 15W75W .

The external power supply may be connected to either a 120V, 60Hz supply or, outside North America, to a 230V, 50Hz

supply, using the appropriate detachable cordset. In all cases, connect to a properly grounded source of supply provided with

maximum 15 Amp overcurrent protection (10 Amp for 230V circuits).

1. Turn the VX3X off.

2. Connect the detachable cordset provided by LXE (US only, all others must provide their own cable) to the external

power supply (IEC 320 connector).

3. Plug cordset into appropriate, grounded, electrical supply receptacle (AC mains).

4. Connect the DC Output Cable end to the corresponding connector on the Adapter Cable.

5. Turn the VX3X on.

E-EQ-VX3XOGWW-G-ARC [ 9 ] VX3X User Guide

1. AC Input Cable (US only)

2. DC Output Cable

3. To DC Output Cable (see above)

4. To VX3X

Table of Contents