Using Optical Media Drives; Loading Discs - Toshiba TECRA A4 User Manual

User's Manual

Using optical media drives

The text and illustrations in this section refer primarily to the optical DVD-ROM
drive. However, operation is the same for all other optical media drives. The full-
size drive provides high-performance execution of CD/DVD-ROM-based pro-
grams. You can run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without an
adaptor. An ATAPI interface controller is used for CD/DVD-ROM operation.
When the computer is accessing a CD/DVD-ROM, an indicator on the drive
glows.
NOTE: Use the WinDVD application to view DVD-Video discs.
If you have a CD-RW/DVD-ROM drive, refer also to the Writing CDs on CD-
RW/DVD-ROM drive section for precautions on writing to CDs.
If you have a DVD +-R/+-RW drive, refer also to the Writing CD/DVDs on
DVD+-R/+-RW drive section for precautions on writing to CDs/DVDs.
If you have a DVD Super Multi drive, refer also to the Writing CD/DVDs on
DVD Super Multi drive section for precautions on writing to CDs/DVDs.

Loading discs

To load CD/DVDs, follow the steps below and refer to figures 4-3 to 4-7.
1. a. When the power is on, press the DVD-ROM eject button to open the
drawer slightly.
E
JECT BUTTON
Figure 4-3 Pressing the DVD-ROM eject button
4-4