Toshiba TECRA A4 User Manual page 148

Portable personal computer
Hide thumbs Also See for TECRA A4:
Table of Contents

Advertisement

To change the boot drive, follow the steps below.
1. Hold down F12 and boot the computer.
2. Use the up/down cursor keys to select boot device you want and press
Enter.
NOTES: 1. If a supervisor password is set, the menu above does not
appear when you use the user password to start the com-
puter.
2. The selection method above does not change the boot prior-
ity settings in HW Setup.
3. If you press a key other than one of those above or if the
selected device is not installed, the system will boot accord-
ing to the current setting in HW Setup.
External Keyboard Fn key
Use this option to set a key combination on an external keyboard to emulate the
Fn key on the computer's internal keyboard. Setting an Fn key equivalent will
let you use "Hotkeys" by pressing the set combination instead of the Fn key. (PS/
2 keyboard only)
Disabled
Fn Equivalent
NOTE: If you select Left Ctrl + Left Alt or Right Ctrl + Right Alt for
this option, you cannot use the selected keys to reboot the computer in
combination with the Del key. For example, if you select Left Ctrl +
Left Alt, you must use Right Ctrl, Right Alt and Del to reboot the com-
puter. Left Ctrl, Left Alt and Del cannot be used.
No Fn key equivalent (Default)
Left Ctrl
+
Right Ctrl
+
Left Alt
+
Right Alt
+
Left Alt
+
HW Setup
Left Alt
Right Alt
Left Shift
Right Shift
Caps Lock
7-7

Advertisement

Table of Contents
loading

Table of Contents