Create Optical Recovery Discs; Restoring The Preinstalled Software From The Recovery Hdd - Toshiba TECRA A4 User Manual

User's Manual

Create Optical Recovery Discs

A recovery image of your computer is stored on the hard disk. You may use this
image to create CD or DVD recovery discs using the following steps:
1. Select either blank CDs or DVD media.
2. The application will allow you to choose a type of media to create recovery
CDs/DVD including: CD-R, CD-RW, DVD-R, DVD-RW, DVD+R and
DVD+RW.
NOTE: Some media may not be compatible with the Optical Drive of
your computer. Please verify your Optical Drive supports the blank media
you choose.
3. Turn on your computer to open Windows XP.
4. Insert the (first) blank media into the tray of the Optical Drive.
5. Double click the Recovery Disc Creator Launcher icon on the Win-
dows XP desktop, or Select the application from Start Menu.
6. After Recovery Disc Creator starts, select the type of media and the title
you wish to copy to the media then click the Burn button.
NOTE: If your Optical Drive can only write to CDs, select "CD" as the
"Type" on Recovery Disc Creator. If your Optical Drive of your computer
can write to either CD or DVDs, select the one you are using as the
"Type" on Recovery Disc Creator.
Restoring the preinstalled software
from the Recovery HDD
About 2.5 GB of hard disk space is reserved for recovery partition.
When re-setting up your hard disk, do not change, delete or add partitions in a
manner other than specified in the manual. Otherwise, space for software may be
destroyed.
In addition, if you use a third-party partitioning program to reconfigure partitions
on your hard disk, it may become impossible to re-setup your computer.
1. Turn off your computer.
2. While holding down 0 (zero) key on the keyboard, turn on your computer.
3. A menu appears. Follow the on-screen instructions.
3-12