The Network - Canon MG6600 Series Manual

Hide thumbs Also See for MG6600 Series:

Table of Contents

You can connect up to 5 devices using the access point mode.

Cannot Print, Scan, or Access the Card Slot from a Computer Connected to

the Network

Make sure that the network settings of the computer are correct.

For the procedures to set up the computer, refer to the instruction manual of your computer or contact its

manufacturer.

If the MP Drivers are not installed, install them.

Install the MP Drivers from our website.

Make sure that access control is not set to the access point.

For the procedures to connect an access point and set it up, refer to the instruction manual of your access

point or contact its manufacturer.

• To check the MAC address or the IP address of the computer, see

Address of the

Checking the IP Address or the MAC

Show Quick Links

Table of Contents