Canon MG6600 Series Manual page 660

Hide thumbs Also See for MG6600 Series:
Table of Contents

Advertisement

1303
Cause
Paper is jammed inside the machine at the transport unit.
Action
If you cannot see the paper at the paper output slot, remove the paper from the transport unit.
Remove the paper following the procedure below.
Note
• If you need to turn off the machine to remove jammed paper during printing, press the Stop button to
cancel print jobs before turning off the machine.
1. Turn the machine off, then unplug the power cord.
2. Stand the machine with the right side facing down.
Important
• When you stand the machine, confirm that the document cover is closed.
• Stand the machine on a wide and flat surface such as a desk.
• When you stand the machine, hold it securely and be careful not to hit it on a hard object.
3. Push the open lever to open the transport unit.
When you open the transport unit, support the machine with your hand so that it does not fall down.
4. Pull out the jammed paper slowly.
When you pull the jammed paper, support the machine with your hand so that it does not fall down.
660

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mg6620Pixma mg6600 seriesPixma mg6660Pixma mg6650Pixma mg6640Pixma mg6610 ... Show all

Table of Contents