Canon MG6600 Series Manual page 654

"Waste tank full"/"Ink absorber full"
"No ink"/"Ink cassette error"
"Ink Error"
"Hardware Error"
"Printer error"
The ink absorber is nearly full.
Check the Support Code on the touch screen
and take the appropriate action to resolve the
error.
Support Code List
• The ink tank is not installed. Install the ink
tank.
Replacing an Ink Tank
• The ink tank is not compatible with this
machine.
Printing cannot be executed because the
ink tank is not compatible with this
machine.
Install an appropriate ink tank.
If you want to cancel printing, press the
machine's Stop button.
Replacing an Ink Tank
• If the lamp on the ink tank is flashing, ink
may have run out.
Check the Support Code on the touch
screen and take the appropriate action to
resolve the error.
Support Code List
An ink tank that was once empty is installed.
Check the Support Code on the touch screen
and take the appropriate action to resolve the
error.
Support Code List
The ink tank cannot be recognized. (The
lamp on the ink tank is off.)
Replace the ink tank.
Replacing an Ink Tank
An error requiring servicing may have
occurred.
Turn off the machine, and unplug the power
cord of the machine from the power supply.
Plug the machine back in and turn the
machine back on.
If the problem is not resolved, contact the
service center.
654