Network Deployment - Vivotek FD8133V User Manual

Network Deployment

General Connection (without PoE)
This section explains how to configure the Network Camera to an Internet
1. If you have external devices such as sensors and alarms, make the connection from the
general I/O terminal block.
2. Use the supplied RJ45 female/female coupler to connect the Network Camera to a
switch.
3. Connect the power cable from the Network Camera to a power outlet. The DC adapter
is user-supllied.
+ : Digital input
- : Digital input
1
2
VIVOTEK
connection.
Ethernet Switch
3
User's Manual - 9