Ptz > Ptz Settings - Vivotek FD8133V User Manual

PTZ > PTZ settings
This section explains how to control the Network Camera's Pan/Tilt/Zoom operation.
There are two ways to enable the camera control function:
Digital: Control the e-PTZ operation. Within a field of view,it allows users to quickly move the
focus to a target area for close-up viewing without physically moving the camera.
Digital PTZ Operation (E-PTZ Operation)
The e-PTZ control settings section will be displayed as shown below:
x1.8
x1.8
x1.8
Only stream 1 supports the e-PTZ related settings. For details, refer to page 89.
Auto pan/patrol speed: Select the speed from 1~5 (slow/fast) to set up the Auto pan/patrol speed control.
Zoom factor display
If you check this item, the zoom indicator will be displayed on the home page when you zoom in/out the
live viewing window as the picture shown on the next page.
When completed with the e-PTZ settings, click Save to enable the settings on this page.
Advanced Mode
2013/3/20 09:57:30
VIVOTEK
User's Manual - 87