Changing Cycles, Modifiers And Options - Kenmore I10.8809 Use And Care Manual

Kenmore clothes dryer user manual
Table of Contents

Advertisement

Available languages

Available languages

Auto Preset Cycle Settings
Follow care label directions.
Auto Dry Cycles
Temperature
Time*
Load Type
(Minutes)
HEAVY DUTY
High
50
Heavyweight mixed loads,
cottons, jeans
COTTON/TOWELS
High
45
Towels, sheets, cottons
NORMAL
Medium
40
Casual clothes,
permanent press
BULKY/BEDDING
Medium
60
Jackets, comforters,
cotton or polyester fiber
filled pillows
ULTRA DELICATE
Extra-Low
25
Washable knits, blouses,
lingerie
*Estimated Time with Auto Dry Level (Normal) setting. Time will
vary depending on load type and load size.
SteamCare
Cycles
Use SteamCare Cycles to help smooth out wrinkles from dry
items, such as clothes that have been worn or clothes that have
been left in the dryer too long. When a SteamCare Cycle is
selected, the estimated time remaining display shows the actual
time remaining in the cycle.
NOTE: Results may vary depending on fabric. 100% cotton
garments with wrinkle-free finish may yield better results than
those without.
Use of a fabric softener sheet is not recommended
with
steam cycles as it may cause temporary staining on the
clothes.
Refresh
This cycle is best for smoothing out wrinkles and reducing odors
from loads consisting of one to four dry items of wrinkle-free
cotton, cotton-polyester
blend, common knits and synthetic
garments. In this cycle a small amount of water is sprayed into
the dryer drum after several minutes of tumbling with heat. The
dryer will continue to tumble with heat followed by a brief cool
down. The heat level and cycle time are not adjustable.
Touch Up
This cycle is best for touching up clothes that have been left in
the dryer too long. In this cycle, a small amount of water is
sprayed into the dryer drum after several minutes of tumbling
with heat. The dryer will continue to tumble with heat followed by
a brief cool down. The dry time and temperature can be adjusted
for this cycle.
NOTE: Overloading the dryer may not yield the same results.
SteamCare Preset Cycle Settings
Timed Cycles
Default
Default Time
Load Type
Temperature
(Minutes)
REFRESH
Medium High
15
Helps to smooth out
wrinkles and reduce odors
from loads consisting of
one to four dry items.
Touch Up
Helps to smooth out
wrinkles in loads left in the
dryer for an extended
period.
Medium High
20
Timed Cycles
Use Timed Cycles to select a specific amount of drying time and
a drying temperature.
When a Timed Cycle is selected, the
Estimated Time Remaining display shows the actual time
remaining in your cycle. You can change the actual time in the
cycle by pressing the TIME ADJUST (More Time or Less Time)
buttons. See "Changing Cycles, Modifiers and Options."
NOTE: Timed Cycles may also be used with the dryer rack. See
"Dryer Rack."
Timed Dry
Use this cycle to complete drying if items are still damp after an
Auto Dry Cycle. Timed Dry is also useful for drying heavyweight
and bulky items, such as blankets and work clothes. Lightweight
garments, such as exercise wear, can be dried using Timed Dry
on a low temperature
setting.
EXPRESS
DRY
TM
Use this cycle for drying small loads or loads that need a short
drying time.
Timed Preset Cycle Settings
Timed Cycles
Default
Default Time*
Load Type
Temperature
(Minutes)
TIMED DRY Heavyweight,
High
40
bulky items, work clothes
EXPRESS DRY
TM
High
23
Small loads
*Default times are remembered from the previous cycle.
22

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents