Honda XL200 Owner's Manual page 93

20
Rear Brake
Pedal Height Adjustment
The stopper bolt (1) is provided to allow adjustment of
the pedal height.
To adjust the pedal height, loosen the lock nut (2) and
turn the stopper bolt. Tighten the lock nut.
(3)
(2)
(1)
(1) Stopper bolt
(2) Lock nut
(3) Rear brake pedal
Brake Adjustment
1. Place the motorcycle on its side stand.
2. Measure the distance the rear brake pedal (3)
moves before the brake starts to take hold.
Free play should be:
20 – 30 mm (0.8 – 1.2 in)
If adjustment is necessary, turn the rear brake
adjusting nut (4).
(4)
(B)
(A)
• Make sure the cut-out on the adjusting nut is seated
on the brake arm pin (5) after making final free play
adjustment.
• If proper adjustment cannot be obtained by this
method, see your Honda dealer.
3. Apply the brake several times and check for free
wheel rotation after the brake lever is released.
Other Checks
Make sure the brake rod, brake arm, spring and
fasteners are in good condition.
Owner´s Manual
(4) Adjusting nut
(5) Brake arm pin
(A) Increase free play
(B) Decrease free play
(5)