Setting The Suction Power - Fakir EAGLE Instruction Manual

GB
3.2 Setting the suction
power
24
OPERATION
4. Set the nozzle switch to "carpet" or "hard floor"
according to the floor (Fig. 11) to be cleaned:
- Hard floor (Fig. 11/A)
Laminate, tiles, PVC, etc.
- Carpet (Fig. 11/B)
Short- and deep-pile carpets, rugs, etc.
5. When working with the vacuum cleaner, pull if after you
(Fig.11)
like a sleigh. Follow the respective recommendations of
the flooring manufacturers.
With the bypass vent (Fig. 12/1) you can quickly
reduce the suction power if less power is needed,
or to release objects accidentally sucked in.
(Fig.12)
You can adjust the suction power to suit the type of floor
being cleaned. Use the symbols on the suction power
display as a guideline (Fig. 13/1):
Curtains, textiles (lowest setting)
Upholstery, cushions
High-class carpets, rugs and runners
slightly soiled carpets and hard floors
Heavily soiled carpets and hard floors with coarse dirt
(highest setting)
1. To set the desired power setting, press the + button or
the - button several times until the desired setting lights
up on the suction power display.
(Fig.13)
- + button (Fig. 13/2) increases suction power
- - button (Fig. 13/3) reduces suction power
NOTICE!