Using Further Nozzles (Accessories) - Fakir EAGLE Instruction Manual

GB
2.2 Using Further Nozzles
22
UNPACKING AND ASSEMBLING
Besides the floor nozzle you just attached, you may extend
the functions of your vacuum cleaner with other nozzles.
• The combi brush and the crevice nozzle are included in
the package as accessories. You can store them in the
accessory compartment when not in use. (Fig.5)
- Combi Brush (Fig.6/1)
Use this to remove dust from objects with delicate surfaces
(e.g. cupboards and tables)
- Crevice Nozzle (Fig.6/2)
Use this to suck dust out of hard to reach places.
(Fig.5)
Only attach nozzles when the vacuum cleaner is not
connected to the mains. The appliance could be
switched on by accident.
This is how you attach the nozzles:
1.Switch off the vacuum cleaner and pull the plug from the
(Fig.6)
mains socket.
2.Pull the attached nozzle off of the telescobic tube.
3.Attach the required nozzle to the bottom end of the
telescobic tube (Fig.9/1) or if necessary directly to the
handle.
(Fig.7)
Using the vacuum cleaner without a nozzle attached
increases the danger of accidentally sucking in objects.
4.If possible, store nozzles no longer in use on the
accessory bracket.
(Fig.8)
WARNING!
ATTENTION!