Setting Adjustment Of The Suction Tube Length - Fakir S 350 Instructions For Use Manual

GB
Setting adjustment of the
suction tube length
7
8
9
10
38
The required length of the telescopic suction tube is ad-
justed in two steps:
● Hold the handle [A] or the upper part of the telescopic
suction tube [G] securely in one hand.
● First hold the lower part of the telescopic suction tube with
the other hand, press down the slider [7] with the thumb
(in sliding direction toward the front) and then pull out the
G A
lower suction tube [8] completely until it engages.
● Hold the middle part of the telescopic suction tube with the
other hand, press down the slider [9] with the thumb (in sli-
ding direction toward the front) and then pull the middle
suction tube [10] out to the required length (adjustable in
small latching stages).
● To slide the telescopic tubes together, press up the sliders
[7] and [9] in each case (in sliding direction toward rear).
G A
● Your vacuum cleaner is now ready for operation.
Assembly Montage