Set 4 Group (Date/Time); Set Hour Format; Set Time - Sherwood Scuba Insight Manual Manual

SET 4 GROUP (DATE/TIME)

Pressing and releasing the S button momentarily 4 times, while the SET GO TO screen is displayed,
will access the SET 4 GO TO screen.
Pressing and releasing the A button 1 time, while the SET 4 GO TO screen is displayed, will access
the SET HOUR FORMAT screen with the Set Point flashing.

SET HOUR FORMAT

Factory set for 12 hour, the HOUR FORMAT can also be set for 24 hour. Information displayed in-
cludes (Fig. 52) -

SET TIME

A
S
Time is set to local factory Time when the unit is calibrated prior to being shipped. Hours and/or Min-
utes can be set as follows.
Fig. 52 - Set Hour
Format
52
• Set Point graphic 12 (or 24) flashing
• TIME icon
• Alpha graphic hour
> Pressing and releasing the S button toggles between the Set Points 12 and 24.
> Pressing and releasing the A button saves the Set Point and/or advances to SET HOUR.
> Depressing both buttons for 2 seconds reverts to the TIME/WET screen.
• Operation reverts to the TIME/WET screen if neither button is pressed in 2 minutes.