Data Screens - Sherwood Scuba Insight Manual Manual

DATA SCREENS

The DATA screens are accessible during a new activation period or greater than 10 minutes after surfacing from a dive. By
pressing the A (Left) button 1 time while the TIME (or WET) screen is being displayed (TIME/WET >> DATA), you can ac-
cess the DATA screen representing the Mode that you set the dive computer to operate in (Nitrox, Air, or Gauge described
later).
You can also access the DATA screen when FLY/SAT is being displayed during the period from 2 hours to 24 hours after a
dive by pressing the A (Left) button 1 time to first recall the TIME/WET screen from which you can access to the sequence of
Surface Displays.
FLY/SAT >> TIME/WET >> DATA >> PLAN >> LAST >> LOG > HIST >> SIM >> SET
ALTITUDE LEVEL Graphics that appear on DATA or Log/History screens represent the following -
SEA (sea level)
L - 2 (level 2)
L - 3 (level 3)
L - 4 (level 4)
L - 5 (level 5)
L - 6 (level 6)
L - 7 (level 7)
outr (out of range)
= 0 to 3,000 feet (915 meters)
= 3,001 to 5,000 feet (916 to 1,525 meters)
= 5,001 to 7,000 feet (1,526 to 2,135 meters)
= 7,001 to 9,000 feet (2,136 to 2,745 meters)
= 9,001 to 11,000 feet (2,746 to 3,355 meters)
= 11,001 to 13,000 feet (3,356 to 3,965 meters)
= 13,001 to 14,000 feet (3,966 to 4,270 meters)
= > 14,000 feet (> 4,270 meters)
INSIGHT
25