Temperature Display; Audible Alarm - Sherwood Scuba Insight Manual Manual

Dive computer
Hide thumbs Also See for Insight:
Table of Contents

Advertisement

Temperature and Altitude Displays
Temperature (Fig. 7A_a) and Altitude (Fig. 7A_b) can be viewed on a Data Display, which can be
accessed while viewing the TIME screen while on the surface.
Temperature can be viewed on an Alternate Display (Fig. 7B_a) which can be accessed during dives.
N
NOTE: The Informational Displays are described in detail as the various
operating modes they appear in are presented throughout this manual.

AUDIBLE ALARM

When Reminder Alarm situations activate the Alarm, the unit will emit a quick double beep each sec-
ond for 10 seconds, or until the situation is corrected, or it is acknowledged by pressing the S (Right)
button.
When Cautionary Alarm situations activate the Alarm, the beep will be on for 1/2 second then off 1/2
second, repeating for 10 seconds, or until the situation is corrected, or it is acknowledged by pressing
the S (Right) button.
Some Alarms cannot be acknowledged. These are differentiated by 1 beep per second for 10 seconds
followed by a full 3 second beep.
If an Alarm is acknowledged and the situation corrected, the Alarm will sound again if the situation
occurs again, or another Alarm situation occurs.
INSIGHT
a
b
A
S
Fig. 7A - Temp & Altitude
(surface)
a
A
S
Fig. 7B - Temp (dives)
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents