Removing The Drive Panel (Tower Computer); Drive Panel - Dell Precision 390 User Manual

Installing Drive-Panel Inserts in the Desktop Computer Drive Panel
1. Place the drive-panel insert tab into the drive-panel slot.
2. Pinch the drive-panel insert release tabs and press the drive panel insert into place.

1 drive panel

4 drive-panel insert tab in tab
slot
3. Ensure that the drive-panel insert is correctly seated in the drive panel.
Switching Drive Orientations
NOTE: The tower computer supports one more 3.5-inch drive in the front than does the desktop computer.
1. If installed, remove the floppy drive by following the steps in
following the steps in Installing a Floppy Drive or Media Card Reader (Desktop
2. If installed, remove optical drives by following the steps in
Installing a CD/DVD Drive (Desktop
Drive Panel
NOTE: For both tower computers and desktop computers, your drive panel may or may not have a slot for the IEEE 1394 connector.

Removing the Drive Panel (Tower Computer)

1. Slide the sliding-plate lever to the right, pivot the drive panel outward, and lift to remove the panel.
2 drive-panel 3 drive-panel insert release tabs
insert (2)
Removing a Floppy Drive or Media Card Reader (Tower
Removing a CD/DVD Drive (Tower
Computer).
Computer).
Computer), and reinstall them by following the steps in
Computer), and reinstall it by