EverFocus EAN Plus series Quick Installation Manual page 8

Ip box camera
Hide thumbs Also See for EAN Plus series:
Table of Contents

Advertisement

5. To change the IP address, double-click the IP Address of the camera. Type a new IP address and
then click Set IP Address to save the settings.
You can also change the other settings by double-clicking the values. After configuring the
values, click Save Configuration.
Note: Most networks uses DHCP to assign IP address, if you are unsure of your network
settings, please consult your network administrators for configuration details.
6. To access the camera, highlight the camera and click Connect to Selected IP. The Internet
Explorer window pops up.
7. Type the user ID and password to log in. The Live View window of the camera appears.
Note:
1. You might be required to download ActiveX for viewing the camera feed. If asked, click Yes.
2. To enable Remove Live View, Firmware Upgrade and ActiveX Prompt on Internet Explorer,
some settings have to be complete. Please refer to 5.2 Settings for Microsoft Internet
Explorer in the User's Manual.
7
EAN Plus Series

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ean3120 plusEan3220 plusEan3300 plus

Table of Contents