2. I/O Terminal Block
The I/O terminal block, located on the rear panel of the camera, can be used to develop application
for alarm input and output.
1 2 3 4
Pin Assignment
No. Function
1
2
3. Installation
This installation guide provides the basic instructions on installing an EAN Plus box IP camera. For
details, please refer to the User's Manual in the software CD.
3.1 Lens Installation and Adjustment
You can install either a CS-mount or a C-mount lens into the camera. It is recommended to use a
lens with aperture ratio of F/1.4 or smaller. Please refer to the following reference steps.
DC Auto Iris Lens Connector
CS-Mount Lens:
1.
Remove the cover cap from the camera body.
2.
Install the lens into the camera body.
3.
Adjust the lens using the Focus / Zoom crews.
No. Function
Alarm COM
3
Alarm Output
4
Focus Screw
Zoom Screw
C-Mount Lens Adapter
Alarm Input
Digital GND
3
EAN Plus Series