Table of Contents
Advertisement
If you are using a DC Auto Iris lens:
1.
Remove the cover cap from the camera body.
2.
Install the lens into the camera body.
3.
Connect the DC cable to the DC Auto Iris Lens Connector.
4.
When making final focus adjustment, place the ND filter (not supplied in the package) in
front of the lens to force the lens iris to open, and then adjust the lens using the Focus /
Zoom Screws.
5.
Lock the Focus Screw and then remove the ND filter.
C-Mount Lens:
1.
Remove the cover cap from the camera body.
2.
Install the lens into the camera body using the supplied C-mount lens adapter.
3.
Adjust the lens using the Focus / Zoom Screws.
Note: Installing a C-mount lens without the C-mount lens adapter may damage the camera
sensor.
3.2 Top / Bottom-Mount
You can use the supplied mounting bracket and screw it on the top of the camera body to
suspend the camera, or on the bottom of the camera body to support the camera.
Top Mount
Bottom Mount
4
EAN Plus Series
Advertisement
Table of Contents
