Sony VPL-S900U Service Manual page 45

Location and Function of Parts
VIDEO IN
1
(MONO)
S VIDEO VIDEO L
AUDIO OUT CONTROL S IN
PLUG IN POWER
INPUT A
MOUSE AUDIO MOUSE
1 VIDEO IN jacks
S VIDEO (mini DIN 4-pin): Connects to the S video output (Y/C
video output) of a video equipment.
VIDEO (phono type): Connects to the composite video output of
video equipment.
Note
If you connect video equipment to both the S VIDEO and VIDEO
jacks, the signal from the S VIDEO jack is selected. When projecting
the picture via the VIDEO jack, be sure not to connect a cable to the
S VIDEO jack.
2 AUDIO IN L (MONO)/R jacks (phono type):
Connect to the audio output of equipment. For stereo equipment,
use both the L and R jacks; for monaural equipment, use the L
(MONO) jack only.
4
AUDIO IN
2
R
INPUT B
AUDIO
Specifications
VIDEO IN jacks
S VIDEO (4-pin mini-DIN type):
Y (luminance) signal input: 1 Vp-p ± 2 dB, sync negative,
75 ohms terminated
C (chrominance) signal input: burst 0.286 Vp-p ± 2 dB (NTSC),
burst 0.3 Vp-p ± 2 dB (PAL), 75 ohms terminated
VIDEO (phono type):
Composite video signal input, 1 Vp-p ± 2 dB, sync negative,
75 ohms terminated
AUDIO IN jacks
L (MONO) / R (phono type):
500 mVrms, impedance more than 47 kilohms
Supplied accessories
Audio/Video cable (1)
Philips screwdriver (1)
Design and specifications are subject to change without notice.
5