Pioneer DDJ-SX Operation Manual page 7

6. EQ-LOW: Adjust the low (bass) frequencies of the corresponding deck.
7. EQ-MID: Adjust the middle (mid) frequencies of the corresponding deck
8. EQ-HI: Adjust the high (treble) frequencies of the corresponding deck
9. TRIM: Adjusts the audio level (gain) of the corresponding deck. When the
"GainSliderIncludesAutoGain" option inside VirtualDj's configuration is set to yes
(default) then the normal (park) position is 12 o clock.
10. PFL VU METERS: Shows the strength of each channel's pre fader signal.
11. MASTER VOLUME. Adjust the level of the Master Output. Hardware operation, not
visible on the VirtualDJ GUI.
12. MASTER VOLUME VU-METERS: Shows strength of the master output signal.
13. BOOTH MONITOR LEVEL: Adjust the level of the Booth Output. Hardware
operation, not visible on the VirtualDJ GUI.
14. HEADPHONES MIXING. Adjust how the Channels and the Master Output blend at
the Headphones Channel. Hardware operation, but movement visible on the
VirtualDJ GUI.
15. MASTER PFL: Press this button to send the Master Output to the Headphones
channel (Hardware operation)
16. SAMPLER VOLUME: Adjusts the Master Volume of the Sampler
VirtualDJ 8 – Pioneer DDJ-SX 7