Pads; Hotcues - Pioneer DDJ-SX Operation Manual

D. PADS

HotCues

Press the HOT CUE mode button to set the PADs to Hot Cue mode.
Each one of the 8 pad assigns a Hot
Cue Point or jumps the track to that Hot
Cue Point (if assigned).
When a Hot Cue Button is unlit, you
can assign a Hot Cue Point by pressing
it at the desired point in your track.
Once it is assigned, the Hot Cue Button
will light on.
The PARAMETER buttons (
Hold SHIFT and then press a pad to
delete its assigned Hot Cue Point.
Leds will blink if a HotCue point exists.
Hold SHIFT and
PARAMETER buttons to adjust the
CBG
Hold SHIFT and press the HOTCUE
button to switch to HotCue points 9-16.
The HOTCUE button will start blinking.
46
) jump the song to the previous/next assigned HotCue point.
press the
VirtualDJ 8 – Pioneer DDJ-SX 13