Roll; Loop - Pioneer DDJ-SX Operation Manual

Roll

Press the ROLL mode button to set the PADs to Loop Roll FX mode.
On Roll mode the Pads trigger a
momentary Loop Roll FX.
The Loop Roll FX is not affecting the
video output, and the waveform of the
track on the VirtualDJ GUI will continue
to indicate the exit point. The size of the
Loop Roll varies (see image).
Press the left PARAMETER (-) button to select the small roll size bank (default value). Press
the right PARAMETER (+) button to select the normal roll size bank (orange values).
Hold SHIFT and then press one of the
pads to trigger a Loop instead of a Roll.
Two banks of loop sizes are offered as
well (see image).

Loop

Hold SHIFT and press the ROLL button
to switch to Loop mode. The ROLL
button will start blinking to indicate this
mode.
Press one of the pads to trigger a Loop
of a different size (see image). Hold
SHIFT and then press one of the pads
to trigger a momentary Loop (while
pressed)
3 Loop Size banks are offered (Small,
Normal and Large), selected by the PARAMETER (46) buttons.
Press the PARAMETER (<) button to select the Small loop size bank (loops 1/32 to 2 beats).
Press the PARAMETER (>) button to select the Large loop size bank (loops 1 to 128 beats).
Use the same buttons to return to the Normal loop bank (loops 1/8 to 16 beats)
When the Small loop size bank is selected the LEFT parameter button (<) will be lit.
When the Large loop size bank is selected the RIGHT parameter button (>) will be lit.
In Normal loop size bank, both parameter buttons are unlit.
VirtualDJ 8 – Pioneer DDJ-SX 14