Hoover RoboCom 2 Instruction Manual page 8

Remote Control** Set Up
To install batteries see Cleaner Maintenance - Replacing the batteries.
Note: The Remote Control** can be used through walls because it works on radio waves not infrared.
Virtual Barrier* Set Up
To install batteries see Cleaner Maintenance - Replacing the batteries.
Remove any obstacles from the area that you want to block.
Ensure the Virtual Barrier* is more than 3m away from the Charger Base Station.
1. Position the Virtual Barrier* so that the infra red transmitter is pointing across the area you want to create
the barrier.
2. Slide the toggle switch to the desired length of the barrier.
ICON
2m
4m
6m
3.
NOTE: The battery power usage relates directly to the infra red level. For longer battery life chose the correct
length of infra red beam.
Barrier*.
Changing the Voice Language
Robo.com² is able to communicate in English, French, Italian or Spanish. The default language is English. To
change this:
1. Turn the Robo.com² on.
2. Press and hold the Voice Button for 5 seconds until you here the current language setting.
3. Press the Voice button again until you hear the next language. Repeat this until you hear the desired
language setting.
4. Once selected the Robo.com² will change the settings. Do not press the remote control again.
NOTE: The language icon will appear for 5 seconds on the display.
DEMO
Adjusting Robo,com² Voice Volume
1. Press the Voice button to select the desired volume. You can select Low, Medium or High or Off.
2. The volume will appear on the display.
NOTE: The voice volume will appear on the display. volume will appear for 5 seconds on the display.
DEMO
* Certain Models Only
** May vary according to model
RoboCom2Manual2011__GB.indd 7
BARRIER TYPE
Short
Medium
Long
ENGLISH ITALIAN FRENCH
LOW MEDIUM HIGH
BARRIER LENGTH
0m
2m
4m
6m
SPANISH
OFF
GB
DEMO
50cm
DEMO
14/07/2011 13.40.01