5.8.1. Rebound damper (rear suspension)
The adjustment is obtained from the standard
position, which is found by fully rotating the ring
clockwise and then counterclokwise (see enclo-
sed table). Rotate clockwise to increase the
damping action or counterclockwise to decrea-
se it.
5.8.2. Compression damper (rear suspension)
The adjustment is obtained from the standard
position, which is found by fully rotating the
screw clockwise and then counterclokwise (see
enclosed table). Rotate clockwise to increase
the damping action or counterclockwise to
decrease it.
ADJUSTMENTS
counter-
clockwise
clock-
wise
- 79 -
- 79 -
5
5