Operator Controls; Front Operator Controls - Siemens Simatic MP 377 Operating Instructions Manual

Operator controls

5.1

Front operator controls

The MP 377 15" Touch daylight readable comes equipped with a transflective display with
higher contrast. This makes objects on the display visible even in direct sunlight and easy to
monitor and operate.
The comprehensive dimming range with 256 settings makes for fatigue-free reading in very
bright and very dark ambient lighting.
Note
Please observe the notes on the touch screen in the operating instructions "MP 377".
You operate the touch screen as follows:
● Touching it directly with a finger
● Touching it with a finger, protected by a thin glove
You cannot operate the touch screen with other devices, such as a touch pen.
Incorrect operation due to dirt particles is not possible. Incorrect operation due to flying
insects has not occurred so far.
MP 377 15" Touch daylight readable (WinCC flexible)
Operating Instructions (Compact), 04/2009, A5E02532357-01
5
37