Siemens Simatic MP 377 Operating Instructions Manual page 18

Safety instructions and approvals
2.3 Standards, certificates and approvals
Tick mark for Australia
The HMI device fulfills the requirements of standard AS/NZS 2064 (Class A).
IEC 61131
The HMI device meets the requirements and criteria conforming to IEC 61131-2,
Programmable Logic Controllers, Part 2, equipment requirements and testing.
Requesting certificates
Copies of the certificates and reports can be requested from the following address:
Siemens AG
Industry Sector
I IA AS R&D ST
PO Box 1963
92209 Amberg
Germany
Certificates are also available at the following Internet address:
"http://support.automation.siemens.com"
Select "Product Support".
18
MP 377 15" Touch daylight readable (WinCC flexible)
Operating Instructions (Compact), 04/2009, A5E02532357-01