Preface - Siemens Simatic MP 377 Operating Instructions Manual

Preface

Purpose of this manual
This manual provides information based on the requirements defined by DIN 62079
regarding mechanical engineering documentation. This information relates to the place of
use, transport, storage, mounting, use and maintenance.
This manual is intended for:
● Installation personnel
● Operators
● Maintenance personnel
Read especially the information in the section "Safety instructions".
Required knowledge
General knowledge in the field of automation engineering is required to understand this
manual.
Scope of the manual
This manual applies to the "MP 377 15" Touch daylight readable" HMI device, order number
6AV6644-8AB20-0AA0.
Note
This manual is an amendment to the operating instructions "MP 377 (WinCC flexible)" and is
valid only in connection with the operating instructions "MP 377 (WinCC flexible)". This
manual includes the differences to the operating instructions "MP 377 (WinCC flexible)".
MP 377 15" Touch daylight readable (WinCC flexible)
Operating Instructions (Compact), 04/2009, A5E02532357-01
3