True CS400 Owner's Manual page 20

CHAPTER 2: ASSEMBLY INSTRUCTIONS
TREADMILL ASSEMBLY STEPS (continued):
STEP 5: Console Rack Cable Connections:
AUXPS from Rack
a) Connect the COAX, AUXPS,
COMM from Rack
COMM and CNTRL cables coming
CNTRL from Rack AUXPS
from the right pedestal to the
COMM
corresponding wires in the console CNTRL
rack.
COAX
NOTE: All four connections are made
for any Console model.
COAX from Rack
STEP 6: Handrail Installation:
a) Insert Handrails (E, F) onto
Pedestals and secure with 4 Bolts -M8
x 80mm (e) and Internal Tooth
Washer M8 (d) using 5 mm Hex Key.
Required Hardware:
4 M8 x 80mm bolts (e)
4 Internal Tooth M8 Washers (d)
STEP 7: Top Shoulder Covers:
a. Using a Phillips screwdriver, install
Shoulder Cover Top pieces Left (G)
and Right (H) with three Screws M4 x
10mm (c) on each side as shown.
CAUTION: Make sure cabling is
NOT pinched during installation.
Required Hardware:
6 M4 x 0.7 x 10mm screws(c)
Truefitness.com / 800.426.6570 / 636.272.7100 16