Samsung SCX-6545N Service Manual page 172

Option
Terminal ID
Remote Code
Error Correction Mode
Fax Initial Setup
Auto Answer Delay
Receive Header
Secure Receive
Received Fax Printing
Redial
Speaker Volume
(Audio Line Monitor)
Service Manual
CÓPIA NÃO CONTROLADA
Alignment & Troubleshooting
Enter the machine ID and fax number which will be printed at the top of each
page. Select the country name. This option usually pre-set for user.
This feature works best when you are using an extension telephone connected
to the EXT socket on the back of your machine. You can receive a fax from
someone you are talking to on the extension telephone, without going to the
fax machine.
It helps with poor line quality and makes sure any faxes you send are properly
transmitted to any other ECM-equipped fax machines. Sending a fax using
ECM may take more time.
You can set Receive Mode for Telephone, Fax or Answering Machine/Fax, and
Dial Type at either DP (Dial Pulse) or MF (Multi Frequency).
When you select Answering Machine/Fax, you can receive a fax while the line
is being used by the answering machine.
Contact your local telephone company for Dial Type setting information.
You can specify the number of times the machine rings before answering an
incoming call.
Use this option to automatically print the page number, date and time of fax
reception at the bottom of each page.
You may need to prevent your received faxes from being accessed by
unauthorized people. This feature restricts printing of received faxes when
the machine is unattended. If you select this option to On, all incoming faxes
go into memory.
A four-digit Passcode is used when you want to print out received faxes in
memory.
When receiving a fax containing pages longer than the paper loaded in the
tray, the machine can reduce the size of the original to fit the size of the paper
loaded in the machine. If this feature is set to Off, the machine cannot reduce
the original to fit onto one page. The original will be divided and printed in
actual size on two or more pages. If you set this option to On and set the
discard size to 10mm and the received data is longer then the currently set
paper in the tray, the machine minuses the data that would have been on the
specified discard segment.
The machine can automatically redial a remote fax machine, if it was busy. You
can set the number of redial attempts and an interval between attempts.
Selecting 0 for Redial Attempts means that the machine will not use this
feature.
This controls the sound when a fax actually starts to transfer data. If this option
is On, the machine sounds from a fax starts until a fax finishes. With Comm.
the machine sounds only until the communication is succeeded. No sound with
Off option.
4-47
CÓPIA NÃO CONTROLADA
Description
Samsung Electronics