Samsung SCX-6545N Service Manual page 131

Digital laser mfp
Hide thumbs Also See for SCX-6545N:
Table of Contents

Advertisement

4.1.2.2 Clearing paper jams
When a paper jam occurs, the warming message appears on the display screen. Refer to the table below to
locate and clear the paper jam.
Message
Feed Jam at Tray 1,
Feed Jam at Tray 2,
Feed Jam at Tray 3,
Feed Jam at Tray 4,
Feed Jam at MP Tray
Check Tray 2 Feed Area,
Check Tray 3 Feed Area,
Check Tray 4 Feed Area
Jam at Fuser
Registration Jam
Duplex Jam 0,
Duplex Jam 1,
Duplex Jam 2
Finisher Jam 0
Finisher Jam 1,
Finisher Duplex Jam
Finisher Jam 2
In the tray 1
1. Pull out the paper tray to open. After you pull it
out completely, lift the front part of the tray up
slightly to release the tray from the machine.
Service Manual
CÓPIA NÃO CONTROLADA
Alignment & Troubleshooting
Location of jam
In the paper feed area (tray 1, optional tray, or multi-purpose tray)
In the paper feed area (optional tray)
In the fuser area or around the toner cartridge
In the paper exit area
In the duplex unit
In the stacker unit
In the stacker unit
In the stacker unit
4-6
CÓPIA NÃO CONTROLADA
2. Remove the jammed paper by gently pulling it
straight out.
Once you remove the jammed paper here, open
the side cover and then close it to clear the error
message on the display.
If there is any resistance, and the paper does not
move immediately when you pull, stop pulling.
Then:
Samsung Electronics

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents