Samsung SCX-6545N Service Manual page 170

Option
Tray Management
Altitude Adjustment
Output Options
Contention Management
Sound
Supplies Management
Machine Test
On Demand Overwrite
Service Manual
CÓPIA NÃO CONTROLADA
Alignment & Troubleshooting
This feature allows you to select the tray and paper you use for a printing job.
Paper size, paper type, and paper color options are adjusted here.
Tray Confirmation Message is to activate the window asking whether you set
the paper size and type for the just opened tray.
• Auto Tray Switch: If tray1 and tray2 are filled with letter size paper, when
tray1 is empty and this option is On, then the machine continues printing with
paper in tray2.
• Auto Continue: When the paper is mismatched, meaning that tray1has
filled with the letter size paper, but the printing job needs A4 size paper, the
machine will wait for 30 seconds to paper in tray1 with proper sized paper.
After 30 seconds, the machine automatically starts printing with Letter sized
paper.
Print quality is affected by atmospheric pressure, which atmospheric pressure
is determined by the height of the machine above sea level. This feature lets
you adjust the altitude in a height district. Higher altitude location need to set
this feature to High 3, which affects print quality.
Output Options is for, when the staples run out, you to let the machine stop
processing and wait to refill the staples or continue the job. If you set Within
Job Offsetting to On, the output paper is placed and sorted by printout-sets.
This feature lets you to select the priority between copy jobs and print jobs.
• Priority: Set the priority by numbering the job. The machine starts from the
least to the highest number in order.
• First In, First Out: The machine does an asked job in order.
You can adjust the loudness of the machine sound. Press Fault to adjust the
machine's error sound. Select Conflict if you pressed the wrong option. Press
Selection to sound whenever you press the selection from your touch screen.
The machine gives you the notification of the drum and toner to reorder, and
resets the used fuser counter, bias transfer roller, feed roller and document
feeder friction pad counter.
The machine prints the test image patterns using Image Quality Test Patterns.
You can set the machine to delete previous job information on HDD as you
store new job information. To activate this feature, go to Admin Setting > the
Setup tab > Optional Service and set the On Demand Image Overwrite option
to Enable. After activating this feature you can overwrite a HDD by pressing
Start in the display.
4-45
CÓPIA NÃO CONTROLADA
Description
Samsung Electronics