gledhill BMA 200 SP - SOL Addendum Manual page 4

F & E Cistern
B
BoilerMate A-Class Solar
E
F & E Cistern
280mm
600mm min clear opening - if door is
located directly in front of the
appliance.
1.0 design
*Increase to 350mm to
provide the minimum
maintenance access to
comply with the Water
Regulations if a ballvalve
and overflow are being
fitted.
Model
BMA 200-SP SOL
BMA 220-SP SOL
BMA 240-SP SOL
The above dimensions do not include the
100mm high installation base.
minimum cupboard dimensions
Model
BMA 200-SP SOL
BMA 220-SP SOL
BMA 240-SP SOL
The above dimensions include the 100mm high
installation base and assume the F & E cistern is
in the same cupboard.
note: add 100mm to the above minimum
cupboard dimensions if a ballvalve and
overflow are being fitted.
options at extra cost
manual for details of the above.
Maintenance
access
Page 4
1.0 introduction
appliance dimensions
Height (A) Width (B)
1330 560
1330 560
1575 560
Height (D) Width (E)
1825 660
1980 660
2225 660
See standard BoilerMate A-Class SP model
Depth (C)
620
620
620
Depth (F)
630
630
630