Operation Of Dry Vacuum; Basic Operation; Maintenance - Viper GVD10-EU User Manual

OPERATION OF VACUUM CLEANER

BASIC OPERATION

2
1
1
2
1
3
min.
max.
1
1
2
1

MAINTENANCE

To keep the machine performing well for many years, Please follow the following maintenance procedures.
﹡ ﹡ ﹡ ﹡ Always confirm that the machine is unplugged prior to performing any maintenance or repairs.
1] Unplug machine as soon as you are not using it.
2] Check power cord for any damage .If any damage is detected, replace the cord immediately.
3] Lubricate casters with a water resistant lubricant every month.
4] Check machine for loose or missing nuts and bolts and replace as necessary.
VA61415(1)2009-01
﹡ ﹡ ﹡ ﹡ Be sure the machine is not plugged into an outlet and confirm that
there is either a cloth or a paper filter in place.
1] Connect vacuum hose(1) to inlet (2) on the machine body.
2] Firmly connect the suction tube parts (1), twist the tubes in order to ensure
4
that they are properly fitted.
3] Connect the suction tube (1) to the suction hose (2).
4] Choose appropriate tool (3), and attach it to the free end of the hose.
Upholstery and difficult to reach areas can be vacuumed with a Upholstery
tool, a Dusting tool or a Crevice tool (4).
5] Plug power cord into grounded outlet.
﹡ ﹡ ﹡ ﹡ Do not use an extension cord in conjunction with the standard power
cord.
6] To start the machine, Turn on the red rocker switch (1).
7] With the mechanical suction control (2) on the upper part of the suction tube,
suction power can be adjusted to the type of surface to be vacuumed.
2
8] Check the filter bag periodically to see if it is full. For optimal performance,
replace the bag when it is 2/3 full.
3
1) Press the snap handle (1) upward and remove the vac cap (2).
2) Remove the filter basket with the cotton cloth (3) .Vacuum the cotton cloth ,
for more thorough cleaning , wash at 30℃. Place washed cotton filter (in
damp state) on filter basket and allow to dry, Dispose of used paper dust
bag.
3) Unfold the new paper dust bag (1) and pull the rubber flange over the
hose socket.
4) Reinsert filter basket with cotton cloth.
5) Attach the vac cap, press down on the carrying handle until the snap
handle audibly clicks into position.
9] This machine is designed to be pulled around by the vacuum hose, so pull
the hose and the vacuum will follow.
10] To stop the machine, at any time simply turn off the rocker switch.
USER MANUAL
SD18-EU GVD10-EU DV-10
ENGLISH
9