Operation Of Up-Right Vacuum; Basic Operation - Viper GTR1500-EU User Manual

SETUP OF UPRIGHT VACUUM
!!! Read operators manual thoroughly prior
to operating or servicing this machine.
Carefully check the shipping carton for
signs of damage. Report any carton
damage to carrier immediately.
Check carton contents to ensure carton is
complete. Contact your Viper distributor if
anything is missing.
Contents:
 Upright Vacuum assembly
 Paper filter bag (inside tank)
 Exhaust filter (installed inside
tank)
 Handle tube with power cord
 Flexible suction hose
 Extendable wand
 Dusting brush (installed on back
of machine)
 Crevice tool (installed on back of
machine)
 Upholstery tool (installed on
back of machine)
ASSEMBLY OF HANDLE & POWER CORD
1) Raise handle latch and place
handle assembly into top of bag
housing as shown in photo below.
2) Lower handle latch to lock h
assembly in place.
VA50531(1)2009-12
1) Ensure the paper filter bag and
2) Securely replace bag housing cover
3) Place the crevice tool, dusting
andle
!!!
thoroughly prior to operating or
servicing this machine.
!!! Do not operate machine without
filter bag or filter cartridge properly
installed.
1) Plug power cord into a grounded
!!! Do not use an extension cord in
conjunction with the standard power
cord.
USER MANUAL
ADDITIONAL MACHINE SETUP
exhaust filter cartridge are in the
bag housing of the machine, and
positioned in their proper places.
prior to operating machine.
brush and upholstery tool into their
holding spots on the rear of the bag
housing.
MACHINE OPERATION
Read operators
STANDARD UPRIGHT MODE
outlet.
GTR1500-EU
ENGLISH
manual
9