ENGLISH
wIrING dIAGrAM FOr GV25-EU GV35-EU
wIrING dIAGrAM FOr GV702-EU
OpErATION
BASIC OpErATION
Check that the vacuum cleaner is switched off.
Check that there is a cloth filter inserted in the dirt tank.
Connect the suction hose: push the hose (2) into the suction inlet (1) until it is sliding in place. to release the hose from machine
just twist and pull out the hose.
Connect the tubes (1) with the hose handle (2), twist the tubes in order to ensure that they are properly fitted.
attach a suitable nozzle (3) to the tube. Choose the nozzle depending on the type of material that is to be picked-up.
insert the power cord into a properly installed and fused socket with earthing contact.
put the on/off switch (4) into position "i" in order to start the motor. (GV702 has two motors/fan units and two on/off switches – one
switch for each motor).
10
USER MANUAL
GV 25 / GV 35 / GV 702
GV12066 (1) – 2012-04-10