Basic Operation; Turning The Phone On/Off; Accessing The Menu - Pantech Caper User Manual

2

BASIC OPERATION

T his chapter addresses and explains the basic features
TM
for CAPER including:

Turning the Phone On/off

Accessing the Menu

Quick Switching Between the Main Menus
Menu Summary
Making a Call
Answering Calls
Missed Call Notification
Pause/Wait Feature
Making an International Call
3-Way Calling
Call Waiting Function
Calling a Number from Contacts
Adjusting Volume
Caller ID Function
Vibrate Mode
Speakerphone Mode
Using Auto Keypad Lock Function
Available Options During a Call
Making an Emergency Call
Dialing Letters
TURNING THE PHONE ON/OFF
TURNING THE PHONE ON
1. Press and hold the END Key until the display turns on.
• If "ENTER LOCK CODE" appears on the display, press the OK Key to unlock the keypad,
and enter your 4-digit lock code.
• The default lock code is the last 4 digits of your phone number.
TURNING THE PHONE OFF
1. Press the OK Key to unlock the keypad, then press and hold the END Key
until your display turns off.
• Immediately change or recharge the battery when
display. Memory may possibly be damaged if the phone turns off due to the battery
completely draining.
• Turn the phone off before removing or replacing the battery. If the phone is on,
unsaved data may be lost.
ACCESSING THE MENU
Your phone can be customized via the menu. Each function can be accessed by pressing
the Directional Key or by pressing the number that corresponds with the menu
item.
1. Press the OK Key [MENU].
2. To scroll through the menu, press the Directional Key
the number that corresponds to the desired menu item.
3. To return to the previous page, press the CLR Key
menu and return to from the home screen, press the END Key .
4. From the home screen, press the OK Key to unlock the keypad, then press the
Left Soft Key [Message] to open the Messages menu or press the Right
Soft Key [Contacts] to open your Contact List.
This manual assumes that Display Themes
List, which are the default settings.
"BATTERY LOW" appears on the
up or down or press
. To exit the current
is set to Amoled, and Menu Layout is set to
01
02
03
04
05
06
07
21