Initializing The Setup Menus - Panasonic AG-HMR10P Operating Insructions

Using the setup menus (continued)
5
Press the [ENTER] button or
item.
Press to change the values.
Example:
• Press to return to the previous menu.
6
4
Repeat steps
items.
Press the [MENU] button to complete the
setting and return to the normal screen.
7
2
Repeat steps
settings.
Press the [MENU] button to complete the
setting and return to the normal screen.
30
to set the
5
to to change any other
5
to to change any other

Initializing the setup menus

Perform the following operation during REC mode
to return the setup menus to their factory default
settings.
1
Press the [MENU] button.
2
Select [OTHER FUNCTIONS] → [MENU
INIT] → [YES], and then press the [ENTER]
button.
When "TURN POWER OFF" appears, turn the
power off by pressing the [POWER] button for 2
seconds or longer, then turn the power back on
again. The current setup menus return to their
factory default settings.
• Even when the setup menus have been
initialized, [TIME ZONE] will not revert to its
factory default setting.
• The metadata is not initialized even when
the setup menus have been initialized. (For
Initializing the metadata, see page 93.)