Panasonic AG-HMR10P Operating Insructions page 81

■
S
SYSTEM ERROR
TURN POWER OFF
Displayed when an error has occurred in the
system. Switch the power off and back on again.
• If this error is displayed when accessing the SD
Memory Card, such as when deleting a clip, the
SD Memory Card may be damaged. Replace it
with a new SD Memory Card.
• If this error is displayed when repairing the
SD Memory Card, use the AVCCAM Restorer
content repair software. (Page 34)
• When the AG-HCK10G camera head is
connected, displayed when the camera cable
is removed with the power on. First turn off the
power, then remove the camera cable.
■
When the camera head is connected
When the AG-HCK10G camera head (optional) is
connected and recording is in progress, displayed when
an abnormality is detected. Turn the power on again.
FOCUS NG
TURN POWER OFF (error in focus operation)
PSD NG
TURN POWER OFF (error in camera shaking detection)
ZOOM NG
TURN POWER OFF (error in zoom motor)
81