Panasonic AG-HMR10P Operating Insructions page 99

Recording
Cannot record even
through the SD Memory
Card is inserted correctly.
Recording stops by itself.
Editing
Cannot read the data on the
SD Memory Card.
Cannot perform nonlinear
editing.
Displays
Something is wrong with
the time code display.
Playback
Cannot play even when I
press the [ENTER] button.
Mosaic-like noise appears
when I cue or review a clip.
Images do not appear on
the television even though
I have connected the
recorder properly.
Cannot hear any sound
from the recorder's
speaker.
•
Is the write-protect switch on the SD Memory Card in the "LOCK"
position? The card cannot be recorded to if the switch is in the
"LOCK" position.
•
Is the remaining memory available on the SD Memory Card
extremely low? Please save contents onto different media and
delete unneeded data from the card, or use a new card instead.
•
Has the SD Memory Card been correctly formatted? Alternatively, is
the card of a format that is incompatible with this unit? Reformat the
card with the unit.
•
8 MB - 16 MB SD Memory Cards cannot be used.
•
Is your SD Memory Card compatible with use for video recording?
Always use an SD Memory Card compatible with use for video
recording.
•
Make sure the SD Memory Card is formatted correctly.
If it is not, format the card in the unit.
•
Check the specifications of your computer and connecting cable.
•
The time code display may not register a regular count if a clip is
played in the reverse slow mode. This is normal.
•
Make sure that the mode is not REC mode.
After changing to PB mode by pressing the [MODE] button, select
the clip to play and press the [ENTER] button.
•
Has a non-matching playback format been selected?
Follow the procedure on page 63 to change the setting.
•
This noise is inherent to digital video technology. This is normal.
•
Make sure the input selector on your television is set correctly.
Read the television's instructions carefully and select the correct
video input connector for the recorder.
•
You may have turned down the recorder's volume control too far.
Adjust the volume level using the [AUDIO MON/ADV] button +.
P33
P34
P16
P16
P34
P72
—
P60
—
—
P70
(Continued on the next page)
99