Card Functions; Meta Data - Panasonic AG-HMR10P Operating Insructions

CARD FUNCTIONS

Display
Item
mode
CARD SDI/CAM
FORMAT PB
CARD STATUS SDI/CAM
PB
CLIP PB
PROPERTY

META DATA

Display
Item
mode
CARD READ SDI/CAM
RECORD SDI/CAM
USER CLIP SDI/CAM
NAME
CLIP COUNT SDI/CAM
RESET
META DATA SDI/CAM
PROP
META INITIAL SDI/CAM
SET
Formats the SD Memory Card.
YES NO
Displays the SD Memory Card status.
YES NO
Displays information about the selected clip.
YES NO
Loads the metadata that is recorded on the SD Memory Card onto the portable
recorder.
YES NO
•
"NO FILE" is displayed when no metadata is recorded on the SD Memory Card.
Sets whether to record the metadata that is loaded onto the portable recorder
simultaneously onto an SD Memory Card.
ON: Records simultaneously.
OFF: Does not record simultaneously.
Selects the data to be recorded as USER CLIP NAME.
TYPE1: Uploaded metadata
TYPE2: Uploaded metadata + COUNT value
The user clip name is the same as the CLIP NAME if there is no uploaded data.
Resets the COUNT value to 1.
YES NO
Displays the metadata that has been recorded on the portable recorder.
YES NO
Initializes the metadata that has been recorded on the portable recorder.
All the settings, including the [RECORD] setting, are cleared.
YES NO
•
The metadata is not initialized even when the setup menus have been
initialized. (Page 30)
Description of settings
Description of settings
indicates the factory default setting.
93