Panasonic AG-HMR10P Operating Insructions page 11

HD-SDI output
6
Example of system configuration for SDI mode
■
When outputting data in the portable recorder's recording format
Select [SDI EE SEL] → [NORMAL] in the [AV OUT SETUP] setup menu.
• Using the setup menus (Page 29)
Camera-recorder
• Data such as information in the OSD and menu screens can be added to the output signal.
(When [OUTPUT OSD] → [ON] is selected in the [DISPLAY SETUP] setup menu.)
• S-VITC/UMID information is not output.
• Use when performing checks on an external monitor.
■
When outputting the input data unchanged
Select [SDI EE SEL] → [THROUGH] in the [AV OUT SETUP] setup menu.
• Using the setup menus (Page 29)
Camera-recorder
• The HD-SDI input signal is output unchanged.
• Use when recording or editing is required on the output device.
• In PB mode, the setting switches automatically to [NORMAL].
AG-HMR10 (portable recorder)
HD-SDI input signal
AG-HMR10 (portable recorder)
HD-SDI input signal
HD-SDI output signal
External device, such as
a recorder
HD-SDI output
signal
External monitor
11