Turning The Power On/Off - Panasonic AG-HMR10P Operating Insructions

Turning the power on/off

Press the [POWER] button for 2 seconds or longer.
• The POWER lamp (green) illuminates and the
power turns on.
• If you press the [POWER] button for 2 seconds
or longer when the power is on, the POWER
lamp flashes, the power turns off, and then the
lamp goes off.
Also, the POWER lamp flashes in the following
circumstances.
• Recording error has occurred
• Camera cable is disconnected (when the AG-
HCK10G camera head (optional) is connected)
• Power-saving mode
In line with the [POWER SAVE] setting in the
[OTHER FUNCTIONS] setup menu, the following
will apply if no designated operations ∗ are
performed for approximately 5 minutes during
recording standby (when an SD Memory Card
has been inserted).
ON: The portable recorder turns off
automatically.
OFF: Does not switch off the portable recorder.
∗ For details on the designated operations, see
[POWER SAVE] in the setup menu (Page 96).
26
AUDIO MON/ADV
REC/
PAUSE