Playback Settings (Play Setup); Setting The Playback Format (Pb Format); Repeat Playback (Repeat Play) - Panasonic AG-HMR10P Operating Insructions

Playback settings (PLAY SETUP)

The playback format and method can be set.
Setting the playback format
(PB FORMAT)
Set the format for playback.
1
Press the [MENU] button.
Using the setup menus (Page 29)
2
Select [PLAY SETUP] → [PB FORMAT], and
then press the [ENTER] button or
3
Press to select the playback format,
and then press the [ENTER] button.
Available formats:
When [SYSTEM FREQ] is set to [59.9Hz]
1080/60i (30P), 1080/24P, 720/60P (30P),
720/24P
When [SYSTEM FREQ] is set to [50Hz]
1080/50i (25P), 720/50P (25P)
• The initial setting is the format that was set
in [REC FORMAT] in the [RECORDING
SETUP] setup menu (REC mode).
4
Press the [MENU] button to return to the
thumbnail screen.
• Clip numbers will be displayed in black
where playback is possible, and in red where
playback is not possible.
Even if the playback format is changed,
the format set in [REC FORMAT] in the
[RECORDING SETUP] setup menu will be
restored when the mode is changed to REC
mode.

Repeat playback (REPEAT PLAY)

Use this setting to repeatedly play back all
available clips.
1
Press the [MENU] button.
Using the setup menus (Page 29)
2
Select [PLAY SETUP] → [REPEAT PLAY] →
[ON].
3
Press the [MENU] button to return to the
.
thumbnail screen.
is displayed on the LCD monitor screen.
When the playback is operated, the playable
clips are played back repeatedly.
• Repeat playback will continue until playback
is stopped.
• To turn the repeat playback setting off, select
[OFF] in step
2
.
63