Advertisement
Anleitung_PRS_600_SPK7:_
Wear ear-muffs.
The impact of noise can cause damage to
hearing.
Wear a breathing mask.
Dust which is harmful to health can be
generated when working on wood and
other materials. Never use the device to
work on any materials containing
asbestos!
Wear safety goggles.
Sparks generated during working or
splinters, chips and dust emitted by the
device can cause loss of sight.
Avoid unintentional starting the machine.
Ensure that the switch is in the "OFF" position
before you insert the plug into the socket
outlet.
If you move or reposition the tool from one area of
job to another whilst still connected to the power
supply ensure you do not have your finger on the
on/off switch whilst doing so.
Remove adjusting tools/wrench(es) prior to
switching on the power tool.
A tool or wrench that is positioned inside a rotating
power tool part can cause injury.
Do not overestimate your abilities. Make sure
you stand squarely and keep your balance at
all times.
This way, you will be able to have better control
over the tool in unexpected situations.
Wear suitable clothes. Never wear loose fitting
clothes or jewellery. Keep hair, clothes and
gloves away from moving parts.
Loose clothing, dangling jewellery and long hair
can be caught by moving parts.
If dust extraction and dust collection devices
can be mounted, ensure that these are
connected and are properly used.
Use of such equipment reduces the risk
associated with dust accumulation.
Helpline No. UK / Northern Ireland 0151 649 1500 Rep. Ireland 189 094 6244
Model Number: PRS 600
15.06.2007
8:31 Uhr
Seite 4
CAREFUL HANDLING AND USE OF ELECTRIC
TOOLS
Do not overload your tool. Only use suitable
electric tools to perform your work.
Using the right electric tool allows you to work
better and safer within the toolʼs quoted capacity
range.
Do not use an electric tool whose switch is
defective.
An electric tool that no longer can be switched on
or off is dangerous and must be repaired.
Always pull the plug out of the socket outlet
before making any adjustments. Exchange
accessory parts or put away the tool.
This precaution eliminates the possibility of
inadvertently starting the tool.
When not in use, store electric tools out of the
reach of children. Do not allow those persons
to use this tool who are unfamiliar with it or
who have not read these instructions.
Electric tools are dangerous when they are used
by inexperienced persons.
Take good care of your tool. Check that
moving parts properly function and do not jam,
that parts are not broken off or damaged in any
way and that the tool can be used to its full
capacity. Have damaged parts repaired prior to
using the tool.
The cause of many accidents can be traced back
to poorly maintained electric tools.
Keep your blades sharp and clean.
Properly maintained blades with sharp edges jam
less frequently and are easier to use.
Use electric tools and plug-in tools, etc. in
compliance with these instructions and in the
manner that is prescribed for the model at
hand. In so doing, pay due attention to working
conditions and the job to be performed.
Using electric tools for applications other than
those intended can lead to dangerous situations.
If the power cable of the electric tool is
damaged, it must be replaced by a specially
prepared connection lead which can be
obtained from the customer service center.
SERVICE
Have your tool repaired only by authorized
specialists using original replacement parts.
This will ensure that your tool remains safe to use.
04
Advertisement
