Pnl Pc Board Assembly; Lcd Holder - Panasonic UF-490 Service Manual

(11)
(12)
(14)
(13)
(16)
(12)
(12)
(12)
(15)
(18)
(17)
(16)
(11) Disconnect the PNL Harness on the PNL PC
Board (1004).
(12) 9 Screws (7B).
(13) Remove Sensor PC Board releasing 2 Latch
Hooks.
(14) Release 3 Latch Hooks.
(15) Remove the PNL PC Board Assembly (703).
(16) Release 2 Latch Hooks.
(17) Remove the LCD Holder (113).
(18) Remove the PNL PCB (703).
Note: Before installing the new PNL PCB
• Remove the protective plastic film from the LCD.
• Snap off the Sensor PCB from the upper right
corner of the PNL PCB.
• Snap off the protective connector cover.
29