Error Codes On Your Pc When Using Multi Function Center Software - Panasonic KX-F1050 Operating Instructions Manual

Error codes on Your PC when using Multi Function Center
software
If an error occurred when functioning the printer or scanner using Multi Function Center software on your PC, the
error code is shown in the 8 digits on the Status Log window as follows.
The meaning of each digit of the error code is different according to the function you are using. If an error oc-
curred using the printer function, see below. In case of using the scanner function, see page 59.
• Error code.in the status of "Printer not ready.":
ILl tll°l
Paper:
When this digit is "1", the unit ran out of paper. Install
paper.
Paper jam near the paper cassette:
When this digit is "1", the recording paper is jammed near
the paper cassette. Clear the jammed paper (p. 62).
Paper jam near the head unit:
When this digit is "1", the recording paper jam occurred
near the head unit. Clear the jammed paper (p. 61).
Cover open:
When this digit is "1", the top cover is open. Close it
Film:
When this digit is "1", film is empty or the film is not
inserted in the cartridge correctly. Replace the film or
film cartridge with a new one (,p. 65) or reinsert the film
correctly by referring to step 8 on page 66.
Unit overheat:
When this digit is "1", the unit is overheated. Leave it to
cool down.
58